Venue: Istanbul Congress Center, B3 Floor, 3B-36
Date: 12 September 2024
Timings:  09:00 – 17:30 (Full Day)
Instructor:  Safa Tuncer

Overview/Synopsis:
It is necessary to close the diastemas that occur in many young individuals after orthodontic treatment, and to reshape the peg laterals and canines to laterals due to congenital missing lateral. Especially in this age group, using direct composite restorations is very important. In this course, different diastema closure techniques, the importance of the layering technique in veneer application in the restoration of peg laterals, and veneer applications in the reshaping of canine teeth will be explained both theoretically and hands-on. In the course, a theoretical presentation will be made about the properties of composite restorative materials, their indications, the conditions required to ensure aesthetics, anatomical guidance, and the selection of restoration techniques in diastemas and peg laterals. In the first part, diastema will be closed on the central teeth (#11, #21) in the phantom jaw model, and veneer restorations will be applied on the lateral teeth with the help of a silicone key. In the second part of the training, you will receive theoretical training on polychromatic composite restorations and finishing-polishing processes. Veneer restorations will be performed hands-on using the layering technique on #22 - #23 teeth. The course will end with the creation of surface features, finishing and polishing processes.

Learning Objectives:

1. Choosing the right composite
2. Appropriate technique for diastema
3. When to apply direct veneer

Language: English & Turkish
Cost: 74,00 EUR
Maximum participants: 20

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-09
Date: 12 September 2024
Timings: 09:00 – 12:30 (Half Day)
Instructor:  Ayşe Gözde Türk

Overview/Synopsis:
The passive fit of fixed and removable prostheses supported by implants depends on the accurate execution of the impression stages. Even the slightest error during the impression stage not only disrupts the fit of the prostheses but also results in failure in the implant-prosthesis connection in the short and long term. Therefore, the aim of this course is to emphasize the points to be considered during the impression stages in the construction of fixed and removable prostheses on implants, along with the application steps, and to conduct practical application of these points.

Learning Objectives:
1) Theoretical and practical learning and application of impression stages for fixed prostheses on implants are undertaken.
2) Theoretical and practical learning and application of impression stages for removable partial dentures are undertaken.
3) The difference between the methods is learned.

Language: English & Turkish
Cost:  49,00 EUR
Maximum participants: 20

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-37
Date: 15 September 2024
Timings:  09:00 – 12:30 (Half Day)
Instructor:  Murat Uslu

Overview/Synopsis:

In dentistry, clinical success requires knowledge of law, business management, as well as communication knowledge that will affect the psychology of patients and healthcare professionals. Successful communication not only increases patient tolerance but also transforms patient satisfaction into enthusiasm. Course training strategy: 1. What is Communication? 2. What is hypnosis? 3. Effective Communication techniques will be defined and explained practically with examples. During the course, interactive studies will be carried out, patient cases will be watched and discussed through videos

Learning Objectives:

1. Initiating hypnotic communication,
2. Teaching effective communication techniques,
3. Clinical change goals.

Language: English & Turkish
Cost: 49,00 EUR
Maximum participants: 25

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-36
Date: 15 September 2024
Timings:  09:00-12:30 (Half Day)
Instructor:  Zeynep Serpil Gönen & Erkut Koca

Overview/Synopsis:

Information that will pave the way for understanding articulators and using them in the most effective way, -Classification and comparison of articulators (digital) -The importance of song recording and its application details. -Relationships and importance of articulators and models in function -Articulator parameters and records of these parameters. -The effects and importance of parameters on designs.

Learning Objectives:
1)Understanding the importance of using articulators and hummingbirds.
2)The importance of articulator controls in designs.
3)Active advantages and disadvantages of articulators in our designs.

Language: English & Turkish
Cost: 49 EUR
Maximum participants: 15

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-11
Date: 15 September 2024
Timings:  09:00 – 12:30 (Half Day)
Instructor:  Elif Kalyoncuoğlu

Overview/Synopsis:

Proper isolation is a prerequisite for successful treatment in all areas of dentistry. The rubber dam technique is a method used to isolate the operative field from the surrounding tissues. The rubber dam effectively protects both patients and dentists, helping patients to have a more professional, safe, and comfortable experience. Having a dry and clean working area is one of the most important factors contributing to the success of the treatment. In recent years, many types of rubber dams are available. The selection of rubber dam and clamp should be made according to the type of restoration applied.

Learning Objectives:

• Selects the appropriate clamp for the treatment to be performed.
• Determines the most suitable method for isolation.
• Effectively isolates the treatment area.

Workshop Language: Turkish
Cost: 49,00 EUR
Maximum participants: 20

*Only dentist participants can register.

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-09
Date: 12 September 2024
Timings: 14:00 – 15:45 (Half Day)
Instructor:  Cansu Atalay

Overview/Synopsis:

Today, due to the impact of social media, there is an increasing emphasis on aesthetics, leading tooth whitening to become one of the most sought-after dental treatments by patients. Dentists should accurately inform patients about these products and provide the most suitable whitening treatment based on the diagnosis, using the appropriate tooth whitening products and methods. The hands-on course will provide an in-depth exploration of the latest advancements in tooth whitening techniques and practical tips for successful clinical implementation. Participants will learn about the various tooth whitening methods available, including in-office treatments, at-home kits, and emerging technologies. The course will cover important topics such as patient assessment, treatment planning, safety considerations, and post-treatment care. By the end of the training, attendees will be equipped with the knowledge and skills necessary to effectively perform tooth whitening procedures and achieve optimal results for their patients.

Learning Objectives:
1. Understand the different tooth whitening methods available, including in-office treatments, at-home kits, and emerging technologies.
2. Learn how to assess and plan tooth whitening treatments based on individual patient needs and considerations.
3. Gain knowledge of safety protocols and post-treatment care practices to ensure successful and effective tooth whitening outcomes.
4. Gain practical manual skills in in-office and at-home tooth whitening.

Language: Turkish
Cost: 49,00 EUR
Maximum participants: 20

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-37
Date: 12 September 2024
Timings:  09:00 – 12:30 (Half Day)
Instructors:  Ali Sinan Horasan & İbrahim Şevki Bayrakdar

Overview/Synopsis:
Treatment planning of dental and maxillofacial pathologies is based on obtaining clinical and radiological information as much as possible. The key of successful treatment planning is to be able to the image area we want to examine with the least radiation dose by using appropriate radiographic techniques following an appropriate clinical examination. In this presentation, all kinds of novel radiological and artificial intelligence applications and may become routine in examination practice in the future will be examined, based on the scientific literature, and for what applications they can be used to improve examination practice. Cases would be examined with HANDS-ON applications using Artificial Intelligence software and a wide variety would be presented compared to conventional techniques.

Learning Objectives:

1. Will have brief information about Dental Volumetric Tomography, Panoramic units, Artificial intelligence and their functioning and will be able to choose the radiology technique according to the case.
2. Will be able to recognize anatomical structures and variations on radiography and define radiopaque/radiolucent lesions.
3. They will be able to test the contributions of artificial intelligence to dentists in the anatomy, pathology and planning stages of dental radiology with practical applications.

Language: English & Turkish
Cost: 49,00 EUR
Maximum participants: 25

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-11
Date: 13 September 2024
Timings: 09:00-12:30 (Half Day)
Instructor:  Abdullah Akman

Overview/Synopsis:

Dental implants have evolved into a standard practice for restoring missing teeth, yet complications during or post-procedure remain prevalent. This course underscores the essential requirement for a comprehensive assessment of systemic and local factors, coupled with an understanding of patient expectations, to facilitate effective planning for dental implant-supported restoration cases. Success pivots to maintaining optimal surgery conditions, employing appropriate instruments, and the expertise of a skilled dentist. It is imperative to safeguard the hard and soft tissues, aiming to minimize trauma and thermal injuries during the implant osteotomy. Prioritizing correct three-dimensional implant placement is crucial for optimal support and stability of peri-implant structures. Surgical precision is pivotal to preserving an ideal implant position, ensuring a functional and aesthetic outcome in dental implant-supported restoration. This course aims to equip participants with the necessary skills to prevent common mistakes that could compromise the restoration, potentially necessitating secondary and demanding surgical interventions.

Learning Objectives:
1)Understand the significance of local and systemic factors in the planning and preparation phase of dental implant surgery.
2)Master the techniques for achieving optimal three-dimensional positioning of dental implants, considering mesio-distal, bucco-lingual, and apico-coronal dimensions.
3) Identify and implement strategies to avoid the most common mistakes and complications associated with dental implant surgery.

Language: English & Turkish
Cost: 49,00 EUR
Maximum participants: 20

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-16
Date: 14 September 2024
Timings:  14:00 - 16:00 (Half Day)
Instructor:  Elif Öztürk Bayazıt

Overview/Synopsis:

This course consists of theoretical and practical parts. In the theoretical part of the course, participants will be informed about what dental photography is and a brief introduction will be made. Then, technical information will be given about the equipment required for dental photography and how to use this equipment. In the practical application part of the course, participants will pair up and take smile and portrait photos of each other.

Learning Objectives:
Participants; 1. Define dental photography, 2. Recognize the equipment and technical settings used in dental photography, 3. Practice intraoral and extraoral photography.

Language: English
Cost: 49,00 EUR
Maximum participants: 20

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-37
Date: 13 September 2024
Timings:  09:00 – 12:30 (Half Day)
Instructor:  Uzay Koç Vural

Overview/Synopsis:

The Direct Posterior Composite Resin Applications Course aims to teach participants the step-by-step processes of placing, shaping, finishing, and polishing of posterior resin composites. Throughout the course, participants learn advanced techniques for direct posterior restorations in challenging scenarios such as large Class II cavities and acquire the skills to apply these techniques predictably and effectively, mimicking the natural tooth. Participants use the sectional matrix systems to create contact points and contact surfaces, becoming competent in band selection and its placement. In this course, participants will have the opportunity to perform applications of different types of composite resins and gain knowledge in selecting the most suitable restoration material for each case. By considering cusp morphology, layering techniques, and adhesion methods, participants acquire the necessary skills to perform complex restorations and become capable of advanced direct composite resin applications by the end of the course.

Learning Objectives:

1. Re-creation of natural tooth anatomy by “cucp by cusp” morphology Selection of the most suitable restoration material for each case
2.  Ensuring proper contour and contacts with the use of sectional matrices 
3. Understand posterior composite restoration sequences and workflow.

Language: English & Turkish
Cost: 49,00 EUR
Maximum participants: 14

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-36
Date: 13 September 2024
Timings:  09:00 – 12:30 (Half Day)
Instructors:  Nuray Çapa Yıldırım & Hüseyin Özcan Yıldırım

Overview/Synopsis:

Esthetic and functional analyses in porcelain lamina veneers help the dentist in evaluating the patient's current condition and realising their expectations. Wax-up and mock-up applications guided by the analyses provide in the planning of the treatment, preparation, colour and material selection, making of the temproray lamina and determination of the final restoration. In addition, it is possible to control adequate and minimal tooth preparation for porcelain lamina veneers with different silicone indexes easily prepared from wax-up models in the clinic. In our course, esthetic and functional analyses on cases will be explained in detail. The dental technician will demonstrate the wax-up application prepared for a case considering of the analyses. Mock-up and different silicone indexes will be made on the 3D-printed models of the case.

Learning Objectives:
1. Evaluation of functional and aesthetic analyses
2. Application of mock-up on 3D-resin models
3. Making different silicone indexes using 3D-resin models

Language: Turkish
Cost: 49,00 EUR
Maximum participants: 20

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-09
Date: 14 September 2024
Timings:  09:00 – 12:30 (Half Day)
Instructor:  Barış Güncü

Overview/Synopsis:

As technology advances, digital dentistry have been becoming increasingly popular. Digital impressions and intraoral scanners have revolutionized the field of prosthetic dentistry, allowing practitioners to obtain accurate and precise impressions for modeling both aesthetic and prosthetic restorations. It is possible to gain predictable and high-quality results with sufficient and accurate data obtained from the beginning of treatment.. This course provides information about intraoral scanning techniques, factors affecting scanning, and how to use the data for a full digital workflow in clinical practice.

Learning Objectives:
1)Intraoral scanners and working principles
2) Accurate and reliable impressions with intraoral scanners
3)Transfer of digital data and communication with the laboratory

Language: English & Turkish
Cost: 49,00 EUR
Maximum participants: 15

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-16
Date: 12 September 2024
Timings:  09:00 – 12:30 (Half Day)
Instructor:  Erdem Kılıç

Overview/Synopsis:
In this course, how to select a patient clinically and radiologically for immediate implant placement when a single tooth extraction is required in the anterior or posterior region, the clinical points to be considered surgically in immediate implant placement, what should be considered in the driling protocol for primary stabilization during implant placement, and what should be considered when grabing will be discussed. First, patient selec;on and surgical application will be demonstrated with case presentations accompanied by videos and then implant application will be performed on jaw models in both anterior and posterior extraction sockets. Participants will be able to practice implant placement in the anterior and posterior extraction sockets and reinforce what to consider when placing implants in the extraction socket in different regions, what to consider in implant selec;on and what to pay aiention to in surgical prac;ce and drilling protocol.

Learning Objectives:

1)Criteria for selecting clinically and radiologically suitable patients for immediate implant placement in anterior and posterior extraction sockets.
2)Considerations when placing implants and grabing in anterior and posterior extraction sockets.
3) Implant selection and driling protocol for primary stabiliza;on when placing implants in anterior and posterior extraction sockets.

Language: English & Turkish
Cost: 49,00 EUR
Maximum participants: 20

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-11
Date: 12 September 2024
Timings:  09:00 - 15:45 (Full Day)
Instructor:  Gülhan Dergin

Overview/Synopsis:
In modern social life, patients' treatment demands are based on two basic parameters. These are treatment duration and clinical success. For clinical success, aesthetically and functionally successful treatments and longevity are the prominent parameters. Patients' demands for socialization in a short period of time and the requirements of busy work life cause the treatment duration factor to come to the forefront. For these reasons, implant treatments and implant designs have focused on immediate loading in recent years. This course includes theoretical, practical and hands-on training for implant selection and immediate loading in different alveolar bone scenarios.

Learning Objectives:

1. Understand the indications and contraindications for immediate loading in a single tooth scenario.
2. Compare the pros and cons with the traditional immediate loading protocol.  Learn how to optimize treatment time in different alveolar bone scenarios.
3. Learn about complications and how to manage them.

Language: English & Turkish
Cost: 74,00 EUR
Maximum participants: 25

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-16
Date: 15 September 2024
Timings:  09:00 - 12:30 (Half Day)
Instructor:  Özgün Yusuf Yılmaz

Overview/Synopsis:

There are a number of factors that challenge clinicians in the construction of implant-retained fixed prostheses developed as an alternative to removable prostheses in cases of complete edentulism.  Irregular bone formations and increased interocclusal distance due to advanced bone loss limit the construction of conventional prostheses and therefore require technical modifications. In such cases, fixed prosthetic rehabilitation with a minimum number of implants without the need for invasive surgical interventions is possible with the development of prosthetic materials and techniques used. Supported by 4 implants, this concept has important biological and biomechanical parameters. The basis of success in prostheses with All-on-Four substructure depends on the correct indication, the exact transfer of the measurement taken with the correct techniques to the model and the passive adaptation of the prosthetic infrastructure into the mouth. Today, it is known that the case-based selection of conventional and digital impression techniques, which are accepted to be superior to each other, directly affects the success of prosthetic treatment. In the half-day training, the trainees will first gain a holistic perspective on the All-on-Four concept with theoretical training, followed by the practical phase and will have the opportunity to learn the technique in question by observing the instructor. In the 2nd part of the practical training, under the supervision of the instructor, they will gain experience by personally practicing conventional impression taking with splinted implants in the open tray technique on specially prepared models.

Learning Objectives:
1)Counts the indications of hybrid prosthesis.
2) Learns hybrid prosthesis impression techniques.
3) Takes a hybrid prosthesis impression.

Language: Turkish
Cost: 49,00 EUR
Maximum participants: 15

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-02
Date: 14 September 2024
Timings:  09:00 – 12:30 (Half Day)
Instructor:  Zeynep Bilge Kütük

Overview/Synopsis:

The Class IV fracture often presents itself as a challenge to the dentist who strives to match the shade, opacity and the varying levels of translucencies that exist between the surrounding dentition as well as within the tooth itself.  When composite is the restorative material utilized, the choice of a highly esthetic composite with a range of opacities, and a layering placement technique are the only means of matching the shade, opacity and degrees of translucency of the adjacent tooth structure. In this course guide participants, step-by-step, through his layering technique and rationale for the selection of opacities and translucent composite. In addition, participants will learn efficient polishing and surface texturizing techniques to ensure a natural esthetic result.

Learning Objectives:
1)How to create a palatal matrix and use it to replace a Class IV lingual shelf
2)How and where to place Dentin, Incisal, Enamel and Specialty Enamel shades
3)How to create life-like restorations
4)How to create enamel texture to mimic real teeth; A polishing technique that is fast and predictable.

Language: English & Turkish
Cost: 49,00 EUR
Maximum participants: 20

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-29
Date: 13 September 2024
Timings:  09:00 – 12:30 (Half Day)
Instructors:  Erhan Dursun & Serdar Özer

Overview/Synopsis:
Due to the bone atrophy and pneumatization of the maxillary sinus, inadequate bone height in the posterior maxilla can complicate dental implant treatment.  To address this limitation, many techniques have been described in the literature  to elevate the floor of the maxillary sinus and allow dental implant placement.  Although different safe and effective sinus lifting techniques have been well-documented for almost 50 years, numerous complications related to the procedure have been reported not only implant failure but also post-operative chronic sinusitis. In this multidisciplinary course, the risk factors for maxillary sinus complications will be addressed and when preoperative otolaryngologic evaluation and imaging of the sinuses is necessary for sinus lift candidates will be enlightened. The parameters that directly influence the selection of sinus lifting technique will be explained in detail. Every attendee will have chance to perform sinus lifting and implant placement in specific models.

Learning Objectives:

1- when and which patient should be consulted to otolaryngology
2- the parameters that should be taken into account not to experience complication in the maxillary sinus
3- how otolaryngologists and dentists approach maxillary sinus complications

Language: English & Turkish
Cost: 49,00 EUR
Maximum participants: 25

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-36
Date: 14 September 2024
Timings: 09:00 – 17:30 (Full Day)
Instructor:  Roland Tomasovzki

Overview/Synopsis:
Top level texture and stain practices on two teeth with the IQ ONE SQIN System

Learning Objectives:
1) 3D Monolithic Painting
2) Micro Layering, Design Tricks.

Language: English
Cost:  74,00 EUR
Maximum participants: 12

*Only Auxiliaries participants can register.

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-09
Date: 13 September 2024
Timings:  09:00 - 17:0030 (Full Day)
Instructor:  Ali Çekici

Overview/Synopsis:

The aim of this hands-on course is to learn about innovations in tooth and root surface cleaning, which form the basis of non-surgical periodontal treatment, by applications on dental models. The training will cover topics such as; the etiology of periodontal diseases, systematic periodontal treatment approach, use hand instruments, and ultrasonic devices, tip options, and supportive periodontal care process.

Learning Objectives:
1)To be able to select the appropriate periodontal hand instrument for the working area.
2) To be able to achieve the correct hand/finger grip on periodontal instruments.
3)To be able to use the correct hand/finger support according to the working area.
4) To be able to select the appropriate ultrasonic instrument tip.

Language: English & Turkish
Cost: 74,00 EUR
Maximum participants: 12

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-09
Date: 15 September 2024
Timings: 09:00 - 17:30 (Full Day)
Instructor:  Birtan Tolga Yılmaz

Overview/Synopsis:

The management of soft tissue in periodontal surgical practices is critically important for successful outcomes. This course covers different soft tissue grafting techniques, graft materials, and their application methods. It will also include practical applications on aesthetic periodontal surgery and soft tissue management.

Learning Objectives:
1.Learning soft tissue grafting techniques.
2.Understanding different graft materials and their application methods.
3.Practicing aesthetic periodontal surgical applications.

Language: English & Turkish
Cost: 49,00 EUR
Maximum participants: 15

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-37
Date: 14 September 2024
Timings:  09:00 – 10:45 (Half Day)
Instructor:  Bilge Duymaz Varoğlu

Overview/Synopsis:

In the first part of our Platelet-Rich Blood Concentrates course, the development, classification, preparation, comparative advantages and disadvantages of platelet products used in many fields of medicine, and their areas of use in oral surgery will be discussed together with theoretical information, current literature support and case presentations. In the second part of our course, 'Blood collection' will be discussed. The preparation of blood taken and platelet-rich fibrin (PRF), injectable fibrin (i-PRF) and bone augmentation (sticky bone) will be explained. After theoretical and practical training, our trainees can take blood from each other and produce platelet-rich fibrin with their own blood, if they wish.

Learning Objectives:
1)To know platelet-rich blood products and understanding the differences between them 
2)To learn in which areas and with which techniques these products can be applied in oral surgery 
3)To experience collecting blood and producing PRF

Language: Turkish
Cost: 49,00 EUR
Maximum participants: 20

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-16
Date: 14 September 2024
Timings:  09:00 – 12:30 (Half Day)
Instructor:  Abdullah Özel

Overview/Synopsis:

In implant dentistry, it is absolutely necessary to address any inadequacies in the ridge of the alveolar bone. Function, support, and aesthetics may be compromised if implants are attempted to be implanted in a bony ridge that is inadequate. In order to prepare the bone for implant placement, more surgeries involving bone augmentation are now being performed as a result of modern grafting materials and techniques. This course will cover how to use autogenous bone for successfully augmenting bone.

Learning Objectives:
1) Learn how to use autogenous bone
2) Learn which defects should be treated with autogenous bone
3) Learn how to perform a predictable autogenous bone augmentation step by step.

Language: English & Turkish
Cost: 49,00 EUR
Maximum participants: 10

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-36
Date: 13 September 2024
Timings: 14:00 - 17:00 (Half Day)
Instructors:  Muhsin Çifter & Cem Ünsal

Overview/Synopsis:

In patients who have experienced tooth loss in the posterior region due to any reason, the ideal and optimal approach is to rehabilitate the space prosthetically or orthodontically as soon as possible. However, patients often seek clinical treatment long after tooth loss. Consequently, molars tilted towards extraction sites are commonly encountered in clinical practice. This situation leads to difficulties related to prosthetic rehabilitation.
The objective of this course is to provide the participants with knowledge and skills related to current biomechanical principals and orthodontic approaches for preprosthetic molar uprighting and space gaining. The course consists of theoretical and hands on practical sessions, covering basic molar uprighting and space gaining mechanics in both conventional and digital workflow formats.

Learning Objectives:
1)Biomechanical Principals of Molar Uprighting,
2)Space Gaining Mechanics Intraoral Scanning Practice Conventional,
3)Digital Treatment Workflows

Language: English & Turkish
Cost: 49,00 EUR
Maximum participants: 7

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-02
Date: 15 September 2024
Timings:  09:00 – 12:30 (Half Day)
Instructor:  Becen Demir

Overview/Synopsis:
This course aims to introduce suturing materials used in suturing practice and teach basic suturing techniques. 

Learning Objectives:

1. Properties of suturing materials
2. Indication of different suturing techniques
3. Hands-on application of four basic suturing techniques.

Language: Turkish
Cost: 49,00 EUR
Maximum participants: 12

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-29
Date: 14 September 2024
Timings: 09:00-12:30 (Half Day)
Instructor:  Ingrid Różyło-Kalinowska

Overview/Synopsis:

The course will consist of introductory lecture on basics of ultrasound, followed by live demonstration of technique of examination and normal ultrasound anatomy of the head and neck. In the lecture there will be discussed such issues as: use of ultrasound waves in generation of diagnostic image, equipment necessary to perform ultrasound examination of the head and neck, types of ultrasound images, application of ultrasound in diagnostic workflow for dentists. In the third part the participants will be divided in smaller groups for hands on part of the course.

Learning Objectives:
1) To understand the basics of ultrasound as imaging modality in dental practice.  
2)To learn normal ultrasound anatomy of the head and neck.
3)To understand how to perform ultrasound examination of the head and neck.

Language: English
Cost: 49,00 EUR
Maximum participants: 25

Register Now

Venue: Istanbul Congress Center, B3 Floor, 3B-11
Date: 14 September 2024
Timings: 09:00 – 10:45 (Half Day)
Instructor:  Özgür Uyanık

Overview/Synopsis:

Many different applications of the warm vertical compaction technique, which is one of the defined methods for filling shaped and cleaned root canals, have been published in the literature over the years. The aim of this course is, within the framework of the canal filling technique with continuous wave of compaction, to identify the application of  the apical third obturation of the root canal and filling of the coronal part with hot gutta percha.

Learning Objectives:
1. Historical summary of warm vertical compaction of root canals
2. To understand the root canal filling technique with continuous heat
3. To understand and apply the obturation of the apical third part of the root canals with the heated plugger method
4. To understand and apply the filling of the coronal part of the root canals with warm gutta percha after the apical plug.
5. To understand and discuss the details of its application in teeth with different root canal anatomy.

Language: English & Turkish
Cost:  49,00 EUR
Maximum participants: 20

Register Now